Are you looking for a simple to install, sleek yet unobtrusive, Zigbee LED light that works well with Home Assistant? I was and I found the Eglo connect.Z series of lights that work amazingly well for me for a reasonable price. Sometimes less is more I was recently looking for Read more
Recently one of my old Sonoff power plugs started acting up so I was looking for a replacement and found a seemingly great one: small, cheap, power measurement and Zigbee 3.0 plus support in ZHA. Is this the best Zigbee power plug for Home Assistant? What makes a great smart Read more
I have used older Aqara switches before with Home Assistant and ZHA. Using the newer H1 I was surprised some things were not working out of the box. Here is how to fix possible issues. The Aqara H1 remote switch Aqara is selling a wide range of quite popular smart Read more
I automated my lights, my doorbell, my vacuum and more. Next are the thermostats. A smart thermostat can be very convenient and even save money. Here is how I used the Aqara smart thermostat with ZHA and Home Assistant. The hardware – Aqara E1 smart thermostat There are currently a Read more
Smart plugs allow you to measure power usage and turn pretty much every electricity powered device smart(er). Which is the best one? The Aqara smart plug makes a pretty good case for joining your Home Assistant and ZHA DIY smart home with its small and sleek design and the included Read more
The stability of your Zigbee network is largely determined by the performance of your coordinator (or router). Switching Zigbee coordinators to a new and better one used to require you to repair all your devices though. With Home Assistant 2022.9 that is a thing of the past. In this post Read more
There are a lot of smart relays on the market. The In-Wall Relay Switch Lite from Evvr tries something new: it does not only have a small form factor and very good built quality but also a small “Sub-Assembly” that makes it work with any plain old light switch. I Read more
If you are looking for a simple solution to make your dimmable lights smart the Tuya smart dimmer switch might be the right solution. I tested this Zigbee switch with Home Assistant, ZHA and Zigbee2MQTT. The Tuya smart light switch The Tuya smart light switch (sometimes sold under the Moes Read more
Smart lightbulbs are great but they get quite dumb really quickly when you toggle the light switch. The Aqara H1 switch can fix this issue. It works with Zigbee in Home Assistant, either with ZHA or Zigbee2MQTT and has a special decoupled mode for usage with smart lights. The Aqara Read more